Shop
Large Diameter Cut-Off Wheel, SG RAIL STEEL
Technical informationDiameter12 InchWall thickness1/8 InchArbor hole20 mmShapeEHT / 41 / T1AbrasiveAluminum oxide ABond hardnessQ (medium-hard)Drive typeElectric angle grinder, Petrol cutter, RAIL cutting machine, Stationary machinesMax. RPM6400Pack qty20PFERD offers rail cut-off wheels (RAIL) in different dimensions. Rail cut-off wheels are used for fast and economical cutting of rails. The wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency. Q hardness wheel for fast and economic cutting of rails.AdvantagesReduced labor time due to aggressive abrasive.Safe cutting work due to the highest possible cutting quality.High economic efficiency due to optimal durability.ApplicationsCuttingCutting of railsCutting of solid materialMaterials that can be workedSteel
Large Diameter Cut-Off Wheel, SGP HD STEEL
Technical informationDiameter20 InchWall thickness3/16 InchArbor hole1 InchAbrasiveAluminum oxide ABond hardnessN (soft)Max. RPM3800Pack qty5PFERD offers products for the most demanding cutting work with its stationary cut-off wheels. Stationary cut-off wheels are available in a variety of versions and dimensions. Special Line SGP includes products engineered for specific tasks that offer the user key advantages over conventional products. This quality line also includes products that, due to their particularly high performance, offer ultimate economic efficiency. Designed for the mots demanding cutting work. Ideal for use in finishing work.AdvantagesUltimate economic efficiency due to optimum durability.Fast work due to excellent cutting characteristics.
Large Diameter Cut-Off Wheel, ZIRKON SGP HD CAST+STEEL
Technical informationDiameter20 InchWall thickness3/16 InchArbor hole1 InchShapeEHT / 41 / T1AbrasiveZABond hardnessR (hard)Drive typeHEAVY DUTY cutting machine, Stationary machinesMax. RPM3800Pack qty5PFERD offers products for the most demanding cutting work with its stationary cut-off wheels. Stationary cut-off wheels are available in a variety of versions and dimensions. Special Line SGP includes products engineered for specific tasks that offer the user key advantages over conventional products. This quality line also includes products that, due to their particularly high performance, offer ultimate economic efficiency. Designed for the most demanding cutting work. Ideal for cutting risers and sprues. Specially developed for use in foundries.AdvantagesUltimate economic efficiency due to optimum durability.Fast work due to excellent cutting characteristics.ApplicationsCuttingCutting of large cross sectionsCutting of pipesCutting of profilesCutting of solid materialMaterials that can be workedSteelCast iron
Long belts, non-woven type
POLIVLIES Surface Conditioning BeltDesigned for universal work on metal surfaces in stationary applications, e.g. removing rough grinding traces, removing oxidation, and light deburring work. Achieve matte and satin-finished surfaces. Long belts are compatible with commonly available belt grinders. POLIVLIES® grit size 100 G = coarse (yellow-brown)Special featuresCost-effective due to high abrasive performance and durability.High tear strength with optimum flexibility.Consistent work results due to high grain adhesion.Recommendations for useUse the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.For best performance, use at a recommended peripheral speed of 1,000-3,000 SFPM.SafetyFollow all safety instructions for abrasive belt use.Technical informationVersioncoarse, yellow-brownWidth2 inGrit100 GPack qty10
M-BRAD® Composite Wheel Brush
Technical informationBrush Diameter8 InchFace Width1 InchFilament MaterialSilicon carbide (SiC)Wire Diameter0.045 InchGrit Size80Arbor Hole2 InchTrim Length2 1/4 InchMax. RPM3600 RPMPack Qty1Uniquely flexible brush. Its nylon filament makes this product ideal for deburring complicated components such as cylinder heads or gears. Developed specially for industrial use. Composite brushes from PFERD have been specifically developed for industrial, automated use. They are suitable for a variety of applications and their variable mounting options mean that they can be used on many different drive systems. This offers the advantage that the workpiece can be produced and finished on the same machine. As a result, labor-intensive, manual work is reduced and repeatable results are achieved with short cycle times. Silicon carbide (SiC) filament brushes are designed for deburring work and surface improvement. Rectangular filament [REC] is designed for particularly demanding applications that require an aggressive brush. The larger cross-section of the filaments means that these are more stiff than round filaments and provide a greater contact area with the workpiece. Plastic filaments are temperature-resistant up to 410°F.AdvantagesLong tool life and aggressive brushing action due to the high filament density.Extremely smooth operation due to evenly distributed filament material.Highly flexible, enabling optimal adjustment to the workpiece contour and less heat build-up.Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.For aggressive work due to rectangular filament (REC).ApplicationsCleaningDeburringRougheningStructuring (matt finishing, brush matting and satin finishing)Materials that can be workedStainless steel (INOX)Steel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsWoodAluminumBronzeCast ironCast steelDrive TypesFlexible shaft driveTool machineRobotStationary machinesStraight grinder
M-BRAD® Composite Wheel Brush
Technical informationBrush Diameter6 InchFace Width1/2 InchFilament MaterialCeramic oxide grain (CO)Wire Diameter0.04 InchGrit Size80Arbor Hole2 InchTrim Length1 1/4 InchMax. RPM3600 RPMPack Qty1Impressively aggressive brush. Its nylon filament makes this product ideal for deburring complicated components such as cylinder heads or gears, as well as for working on surfaces. Developed specially for industrial use. Uniquely flexible brush. Its nylon filament makes this product ideal for deburring complicated components such as cylinder heads or gears. Developed specially for industrial use. Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness. For high stock removal and aggressive brushing action. Plastic filaments are temperature-resistant up to 410°F.AdvantagesLong tool life and aggressive brushing action due to the high filament density.Extremely smooth operation due to evenly distributed filament material.Highly flexible, enabling optimal adjustment to the workpiece contour and less heat build-up.Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.For particularly aggressive machining and for creating a high surface quality.ApplicationsCleaningDeburringStructuring (matt finishing, brush matting and satin finishing)Materials that can be workedSoft titanium alloys (tensile strength 500 N/mm²)Steel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)TitaniumTitanium alloysAluminumBronzeCast ironCast steelDrive TypesFlexible shaft driveTool machineRobotStationary machinesStraight grinder
M-BRAD® Cup Brush
Technical informationBrush Diameter3 1/2 InchFilament MaterialSilicon carbide (SiC)Wire Diameter0.04 InchGrit Size120Thread / Arbor5/8-11Trim Length7/8 InchMax. RPM12000 RPMPack Qty1Excellent for medium-duty brushing such as deburring, cleaning, and derusting of large surfaces. Silicon carbide (SiC) filament brushes are designed for deburring work and surface improvement. Plastic filaments are temperature-resistant up to 410°F.AdvantagesHighly flexible, enabling optimal adaptation to the workpiece contour.Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.ApplicationsCleaningDeburringRougheningStructuring (matt finishing, brush matting and satin finishing)Materials that can be workedStainless steel (INOX)Steel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsWoodAluminumBronzeCast ironCast steelDrive TypesAngle grinderCordless angle grinder
M-BRAD® End Brush - Banded
Technical informationBrush Diameter1/2 InchFilament MaterialSilicon carbide (SiC)Wire Diameter0.04 InchGrit Size120Shank Diameter1/4 InchTrim Length1 InchMax. RPM20000 RPMPack Qty10Designed for light brushing such as deburring, cleaning and derusting. Silicon carbide (SiC) filament brushes are designed for deburring work and surface improvement. Plastic filaments are temperature-resistant up to 410°F.AdvantagesThe bridle prevents the wires spreading out sideways.The bridle enables the spreading out and flexibility of the brush filament to be strictly controlled.Optimal access to hard-to-reach areas such as recesses and drilled holes.If the filament has worn away down to the bridle, it can be removed from the bridle for further use. This does not affect the brushing behavior.Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.ApplicationsCleaningDeburringRougheningStructuring (matt finishing, brush matting and satin finishing)Materials that can be workedStainless steel (INOX)Steel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsWoodAluminumBronzeCast ironCast steelDrive TypesFlexible shaft drivePower drillStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
M-BRAD® Miniature Cup Brush
Technical informationBrush Diameter9/16 InchFilament MaterialAluminum oxide (AO)Wire Diameter0.012 InchGrit Size600Shank Diameter1/8 InchTrim Length1/4 InchMax. RPM6000 RPMPack Qty36Designed for light brushing such as deburring, cleaning and polishing. Ideal for brushing on small surfaces due to face-down use with the entire brush face applied to the workpiece. PFERD offers a wide range of miniature brushes for precision work. These can be used on flexible shaft drives, micro motors or electric grinders. Brushes with aluminum oxide (AO) are less sharp-edged and aggressive than those with SiC. These brushes are designed for polishing and smoothing finishes on soft metals. Plastic filaments are temperature-resistant up to 410°F.AdvantagesMaximum precision and efficiency on delicate workpieces.Highly flexible, enabling optimal adaptation to the workpiece contour.Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.ApplicationsCleaningDeburringMaterials that can be workedSteel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)AluminumBronzeCast ironCast steelCobalt-based alloysOther non-ferrous metalsDrive TypesFlexible shaft driveStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
M-BRAD® Mounted Disc Brush
Technical informationBrush Diameter1 InchFilament MaterialCeramic oxide grain (CO)Wire Diameter0.04 InchGrit Size80Shank Diameter1/4 InchTrim Length1 1/8 InchMax. RPM5000 RPMPack Qty1Ideal for deburring and work on surfaces on stationary machines. Composite brushes from PFERD have been specifically developed for industrial, automated use. They are suitable for a variety of applications and their variable mounting options mean that they can be used on many different drive systems. This offers the advantage that the workpiece can be produced and finished on the same machine. As a result, labor-intensive, manual work is reduced and repeatable results are achieved with short cycle times. Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness. For high stock removal and aggressive brushing action. Plastic filaments are temperature-resistant up to 410°F.AdvantagesLong tool life and aggressive brushing action due to the high filament density.Extremely smooth operation due to evenly distributed filament material.Optimal access to hard-to-reach areas, such as drilled holes and crevices, as the filament spreads out upon rotation.The bridle prevents the wires spreading out sideways.If the filament has worn away down to the bridle, the bridle can be removed to extend the life of the brush. This does not affect the brushing behavior.The bridle enables the spreading out and flexibility of the brush filament to be controlled.Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.For particularly aggressive machining and for creating a high surface quality.ApplicationsCleaningDeburringStructuring (matt finishing, brush matting and satin finishing)Materials that can be workedSoft titanium alloys (tensile strength 500 N/mm²)Steel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)TitaniumTitanium alloysAluminumBronzeCast ironCast steelDrive TypesFlexible shaft driveTool machinePower drillRobotStationary machinesStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
M-BRAD® Mounted Disc Brush
Technical informationBrush Diameter4 InchFilament MaterialNylonWire Diameter0.016 InchArbor Hole7/8 InchTrim Length1 1/2 InchMax. RPM3500 RPMPack Qty1Uniquely flexible brush. Ideal for deburring and work on surfaces. Perfect for use on stationary machines. Composite brushes from PFERD have been specifically developed for industrial, automated use. They are suitable for a variety of applications and their variable mounting options mean that they can be used on many different drive systems. This offers the advantage that the workpiece can be produced and finished on the same machine. As a result, labor-intensive, manual work is reduced and repeatable results are achieved with short cycle times. Nylon filament brushes are designed for working on materials that would otherwise be scratched or damaged, e.g. soft plastics. Plastic filaments are temperature-resistant up to 410°F.AdvantagesLong tool life and aggressive brushing action due to the high filament density.Extremely smooth operation due to evenly distributed filament material.Special arrangement of the filament enables optimal adjustment to the workpiece contour, less heat build-up, and more efficient use of the coolant.ApplicationsCleaningDeburringMaterials that can be workedThermoplasticsThermosetting plasticsOther non-ferrous metalsDrive TypesTool machineRobotStationary machines
M-BRAD® Mounted Disc Brush
Technical informationBrush Diameter2 InchFilament MaterialNylonWire Diameter0.016 InchShank Diameter1/4 InchTrim Length1 1/2 InchMax. RPM5000 RPMPack Qty1Particularly aggressive brush with bridle. Ideal for deburring and work on surfaces on stationary machines. Composite brushes from PFERD have been specifically developed for industrial, automated use. They are suitable for a variety of applications and their variable mounting options mean that they can be used on many different drive systems. This offers the advantage that the workpiece can be produced and finished on the same machine. As a result, labor-intensive, manual work is reduced and repeatable results are achieved with short cycle times. Nylon filament brushes are designed for working on materials that would otherwise be scratched or damaged, e.g. soft plastics. Plastic filaments are temperature-resistant up to 410°F.AdvantagesLong tool life and aggressive brushing action due to the high filament density.Extremely smooth operation due to evenly distributed filament material.If the filament has worn away down to the bridle, the bridle can be removed to extend the life of the brush. This does not affect the brushing behavior.The bridle enables the spreading out and flexibility of the brush filament to be controlled.The bridle prevents the wires spreading out sideways.ApplicationsCleaningDeburringMaterials that can be workedThermoplasticsThermosetting plasticsOther non-ferrous metalsDrive TypesFlexible shaft driveTool machineRobotStationary machinesStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
M-BRAD® Mounted Disc Brush
Technical informationBrush Diameter6 InchFilament MaterialNylonWire Diameter0.016 InchArbor Hole7/8 InchTrim Length1 1/2 InchMax. RPM2500 RPMPack Qty1Particularly aggressive brush with bridle. Ideal for deburring and work on surfaces on stationary machines. Composite brushes from PFERD have been specifically developed for industrial, automated use. They are suitable for a variety of applications and their variable mounting options mean that they can be used on many different drive systems. This offers the advantage that the workpiece can be produced and finished on the same machine. As a result, labor-intensive, manual work is reduced and repeatable results are achieved with short cycle times. Nylon filament brushes are designed for working on materials that would otherwise be scratched or damaged, e.g. soft plastics. Plastic filaments are temperature-resistant up to 410°F.AdvantagesLong tool life and aggressive brushing action due to the high filament density.Extremely smooth operation due to evenly distributed filament material.The bridle prevents the wires spreading out sideways.If the filament has worn away down to the bridle, the bridle can be removed to extend the life of the brush. This does not affect the brushing behavior.The bridle enables the spreading out and flexibility of the brush filament to be controlled.ApplicationsCleaningDeburringMaterials that can be workedThermoplasticsThermosetting plasticsOther non-ferrous metalsDrive TypesTool machineRobotStationary machines
M-BRAD® Mounted Wheel Brush PSF
Technical informationBrush Diameter3 InchFilament MaterialSilicon carbide (SiC)Wire Diameter0.04 InchGrit Size120Shank Diameter1/4 InchTrim Length3/4 InchMax. RPM4500 RPMPack Qty5Designed for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint. Specially developed for use with low rotational speeds on cordless drills and power drills. Silicon carbide (SiC) filament brushes are designed for deburring work and surface improvement. Plastic filaments are temperature-resistant up to 410°F.AdvantagesHighly flexible, enabling optimal adaptation to the workpiece contour.Packaged for retail.Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.ApplicationsCleaningDeburringRougheningStructuring (matt finishing, brush matting and satin finishing)Materials that can be workedStainless steel (INOX)Steel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsWoodAluminumBronzeCast ironCast steelDrive TypesFlexible shaft drivePower drillStraight grinderSafetyWhen clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
M-BRAD® Wheel Brush
Technical informationBrush Diameter6 InchFace Width13/16 InchFilament MaterialSilicon carbide (SiC)Wire Diameter0.022 InchGrit Size320Arbor Hole1 1/4 InchTrim Length1 1/8 InchMax. RPM6000 RPMPack Qty1Excellent for medium-duty hand-held or automated brushing of large workpieces. Silicon carbide (SiC) filament brushes are designed for deburring work and surface improvement. Plastic filaments are temperature-resistant up to 410°F. Developed specially for industrial use.AdvantagesDurability makes this cost-effective.The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved.Can be used with all common stationary drive systems and bench grinders.Highly flexible, enabling optimal adaptation to the workpiece contour.Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.ApplicationsCleaningDeburringRougheningStructuring (matt finishing, brush matting and satin finishing)Materials that can be workedStainless steel (INOX)Steel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)ThermoplasticsWoodAluminumBronzeCast ironCast steel
M-BRAD® Wheel Brush
Technical informationBrush Diameter4 InchFace Width3/4 InchFilament MaterialCeramic oxide grain (CO)Wire Diameter0.022 InchGrit Size120Arbor Hole1/2 InchTrim Length3/4 InchMax. RPM12500 RPMPack Qty2Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness. For high stock removal and aggressive brushing action. Plastic filaments are temperature-resistant up to 410°F. Excellent for medium-duty hand-held or automated brushing of large workpieces.AdvantagesCan be used with all common stationary drive systems and bench grinders.The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved.Highly flexible, enabling optimal adaptation to the workpiece contour.Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.ApplicationsCleaningDeburringStructuring (matt finishing, brush matting and satin finishing)Materials that can be workedSoft titanium alloys (tensile strength 500 N/mm²)Steel, cast steelSteel materials with a hardness > 54 HRCSteels up to 370 HV (< 38 HRC)TitaniumTitanium alloysAluminumBronzeCast ironCast steelDrive TypesBench grinderFlexible shaft driveStraight grinder
Machinist's file flat
Technical informationPFERD Flat File 12" Second CutItem number11103302Cut2Cut files typeSecondEDP no.11014Height9/32 InchIncl. handlewithoutLength12 InchPFERD TOOLS type1122Width1.15625 InchPackaging unit5 EACHPFERD's machinist files meet the highest quality standards. They are long lasting and have very good stock removal rates. Rectangular file, tapered and cut on four sides. Tanged version. Designed for work on rectangular geometries. Second cut for universal filing work. Files come in industrial packaging without handles.Special featuresConsistently high stock removal rate from the tip to the tang.Durable.Application-oriented design.Recommendations for useUse this file for universal workshop applications.Workpiece materialsSteel, cast steelSteels up to 370 HV (< 38 HRC)ZincAluminumBrassBronzeCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)ApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
Machinist's file half-round
Technical informationPFERD Pipeline File 14" Coarse CutItem number18100398Cut1Cut files typeBastardEDP no.11155Height11/32 InchIncl. handlewithoutLength14 InchPFERD TOOLS type1152Width1.375 InchPackaging unit5 EACHPFERD special files are designed for specific uses, such as for processing soft metals and thermosetting plastics, for deburring parts turned on a lathe, or for sharpening cutting tools. Files for working on pipeline weld seams and for removing scale on pipelines. Files come in industrial packaging without handles.Workpiece materialsSteel, cast steelSteels up to 370 HV (< 38 HRC)ZincAluminumBrassBronzeCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)ApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
Machinist's file half-round pointed
Technical informationPFERD Half Round File 10" Second Cut with Handle RetailItem number11235257Cut2Cut files typeSecondEDP no.11027PHeight9/32 InchIncl. handle12617141Length10 InchPFERD TOOLS type1152 SPWidth15/16 InchPackaging unit1 EACHPFERD's machinist files meet the highest quality standards. They are long lasting and have very good stock removal rates. Half-round pointed file, cut on two sides. Tanged version. Designed for filing out concave surfaces and crevices, and for rounding out holes. Second cut for universal filing work. Files come in point-of-sale packaging with ergonomic file handles.Special featuresConsistently high stock removal rate from the tip to the tang.Durable.Application-oriented design.Recommendations for useUse this file for universal workshop applications.Workpiece materialsSteel, cast steelSteels up to 370 HV (< 38 HRC)ZincAluminumBrassBronzeCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)ApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
Machinist's file hand
Technical informationPFERD Flat PLUS File 12" with Handle RetailItem number11215306CutPLUS-cutCut files typePLUS-cutEDP no.11136PHeight9/32 InchIncl. handle12617151Length12 InchPFERD TOOLS type1112Width1.15625 InchPackaging unit1 EACHPFERD's machinist files meet the highest quality standards. They are long lasting and have very good stock removal rates. Rectangular file, cut on three sides, one side uncut. Tanged version. Designed for working on rectangular surfaces. Superior stock removal due to the PLUS cut. Files come in point-of-sale packaging with ergonomic file handles.Special featuresConsistently high stock removal rate from the tip to the tang.Durable.Application-oriented design.Easy and energy-saving due to spade-like filing teeth.No loading when processing soft materials due to a wide chip breaker.Good for all hobby and DIY purposes.Workpiece materialsSteel, cast steelSteels up to 370 HV (< 38 HRC)ZincAluminumBrassBronzeCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)ApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
Machinist's file knife
Technical informationPFERD Knife File 8" Smooth Cut Smooth CutItem number11109203Cut3Cut files typeSmoothEDP no.11057Height3/16 InchIncl. handlewithoutLength8 InchPFERD TOOLS type1172Width27/32 InchPackaging unit10 EACHPFERD's machinist files meet the highest quality standards. They are long lasting and have very good stock removal rates. Triangular file with knife profile, cut on two sides and the narrow edge. Tanged version. For work on very acute-angled and narrow-shaped surfaces. Smooth cut for precision processing and finishing. Files come in industrial packaging without handles.Special featuresConsistently high stock removal rate from the tip to the tang.Durable.Application-oriented design.Recommendations for useUse this file for fine processing and finishing.Workpiece materialsSteel, cast steelSteels up to 370 HV (< 38 HRC)ZincAluminumBrassBronzeCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)ApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
Machinist's file round
Technical informationPFERD Round File 4" Coarse CutItem number11107101Cut1Cut files typeBastardEDP no.11061Incl. handlewithoutLength4 InchPFERD TOOLS type1162Dia. external5/32 InchPackaging unit10 EACHPFERD's machinist files meet the highest quality standards. They are long lasting and have very good stock removal rates. Round file cut all the way around the circumference. Tanged version. Designed for work on circular holes and rounded grooves. Bastard cut for coarse stock removal and roughing. Files come in industrial packaging without handles.Special featuresRapid metal removal and smooth surface finish due to spiral cut.Consistently high stock removal rate from the tip to the tang.Durable.Application-oriented design.Recommendations for useUse this file for roughing or coarse stock removal.Workpiece materialsSteel, cast steelSteels up to 370 HV (< 38 HRC)ZincAluminumBrassBronzeCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)ApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
Machinist's file square
Technical informationPFERD Square File 10" Smooth CutItem number11104253Cut3Cut files typeSmoothEDP no.11092Incl. handlewithoutLength10 InchPFERD TOOLS type1142Width3/8 InchPackaging unit10 EACHPFERD's machinist files meet the highest quality standards. They are long lasting and have very good stock removal rates. Square file, tapered and cut on four sides. Tanged version. Designed for filing angular surfaces. Smooth cut for precision processing and finishing. Files come in industrial packaging without handles.Special featuresConsistently high stock removal rate from the tip to the tang.Durable.Application-oriented design.Recommendations for useUse this file for fine processing and finishing.Workpiece materialsSteel, cast steelSteels up to 370 HV (< 38 HRC)ZincAluminumBrassBronzeCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)ApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
Machinist's file three square
Technical informationPFERD Three Square File 6" Second CutItem number11108152Cut2Cut files typeSecondEDP no.11098Incl. handlewithoutLength6 InchPFERD TOOLS type1132Width15/32 InchPackaging unit10 EACHPFERD's machinist files meet the highest quality standards. They are long lasting and have very good stock removal rates. Triangular file, tapered and cut on all three sides. Tanged version. Designed for filing angular surfaces. Second cut for universal filing work. Files come in industrial packaging without handles.Special featuresConsistently high stock removal rate from the tip to the tang.Durable.Application-oriented design.Recommendations for useUse this file for universal workshop applications.Workpiece materialsSteel, cast steelSteels up to 370 HV (< 38 HRC)ZincAluminumBrassBronzeCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)ApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application