Felt Point, 1 x 1 1/4", Shape Cylinders, M (medium), 1/4" shank
$0.00
Product number:
47901192
Product information "Felt Point, 1 x 1 1/4", Shape Cylinders, M (medium), 1/4" shank"
Technical information
1 x 1 1/4", Shape Cylinders, M (medium), 1/4" shank
| Shape | Cylinders |
| Version | M (medium) |
| Dia. External | 1 in |
| Width | 1 1/4 in |
| Dia. shank | 1/4 Inch |
| Drive type | Flexible shaft drive |
| Max. RPM | 19000 |
| Pack qty | 10 |
Due to their hardness and flexibility, felt points are used when the exact form of geometric shapes has to be maintained. The cylindrical shape is mainly used peripherally. The variant with an end hole (ST-BO) is particularly suitable for face-down use.
Special features
- Can be freely shaped, meaning they can be used on complicated geometries.
- Precise retention of geometric shapes due to the hardness of these products.
Applications
- Polishing
Materials that can be worked
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Thermoplastics
- Titanium
- Titanium alloys
- Aluminum
- Brass
- Bronze
- Cast steel
- Cobalt-based alloys
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Hardened, heat-treated steels over 370 HV (38 HRC)
- Nickel-based alloys (e.g. Inconell and Hastelloy)
Recommendations for use
- For the best performance, use with a recommended peripheral speed of 1,000-2,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.
- Use diamond polishing pastes and polishing paste bars.
- When applying a different polishing paste, use a new unused polishing product.
Safety
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
| Pack Qty: | 10 |
|---|
Login
No reviews found. Share your insights with others.