Felt Flap Disc, 4 1/2 x 7/8", W (soft)
$0.00
Product number:
44370115
Product information "Felt Flap Disc, 4 1/2 x 7/8", W (soft)"
Technical information
4 1/2 x 7/8", W (soft)
| Version | W (soft) |
| Dia. External | 4 1/2 in |
| Width | 7/8 in |
| Drive type | Angle grinder |
| Max. RPM | 8350 |
| Pack qty | 5 |
Felt flap discs are used for pre-polishing and high-gloss polishing on medium-sized to large components. Due to their hardness and flexibility, felt flap discs are used when the exact form of geometric shapes has to be maintained. As a general rule, diamond polishing pastes and polishing paste bars are used for this.
Special features
- Conforms to contours due to high flexibility.
- Can be freely shaped, meaning they can be used on complicated geometries.
- Low thermal load on the workpiece.
Applications
- Polishing
Materials that can be worked
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Thermoplastics
- Titanium
- Titanium alloys
- Aluminum
- Brass
- Bronze
- Cast steel
- Cobalt-based alloys
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Hardened, heat-treated steels over 370 HV (38 HRC)
- Nickel-based alloys (e.g. Inconell and Hastelloy)
Recommendations for use
- Use the soft type for buffing and processing workpieces with lots of contours. If a very fine finish is desired, the hard and soft types can be used successively.
| Pack Qty: | 5 |
|---|
Login
No reviews found. Share your insights with others.