Tooling
Diamond handy file set 5-piece 8 1/2" D126 (medium) shank forged/can be used without a handle
Diamond handy file sets come in sturdy, practical plastic boxes that protect the files from damage. These are ideal for storing on a workbench. Diamond riffler files are designed for hard-to-reach areas and complex shapes. The coating length is 25 mm on both sides of the files.
Diamond Needle File Set - 5 Pieces
The diamond needle file set comes in a sturdy, practical plastic box which protects the tools from damage. This is ideal for keeping in the tool trolley or workbench. Diamond needle files can be used universally in tool making. This set contains one each of the following file shapes: hand, three square, square, half-round, and round
Diamond Riffler File Set 6 Pieces Medium Cut
The diamond riffler file set comes in a sturdy, practical plastic box which protects the tools from damage. This is ideal for keeping in the tool trolley or workbench. Diamond riffler files are used for work in hard-to-reach areas and on complex geometries. The coating length is 1" on each side of the files." The coating length is 25 mm on both sides of the files. The set contains one each of the following file shapes: crossing oval, hand, square, three square, round.
DIY File Set - 3 Pieces
Quality files designed for DIY users. Precise, with a high stock removal rate and good durability. Also suitable for sharpening. Each file comes with an ergonomic file handle. Packaged in a cardboard box.
Edge Sharpener
Technical informationPFERD Universal Edge Sharpener 4-1/2"Item number13217110Cut2Cut files typeSecondEDP no.13025Length4.5 InchPFERD TOOLS typeUKFPackaging unit1 EACHRectangular file in a special plastic holder, straight cut on two sides. Ideal for easy and fast repair and for deburring on the bars of chain saws. Regular maintenance extends the service life of the bar and saw chain. Increases cutting precision and safety.Special featuresThe special holder enables easy tool control and exact, right-angled positioning of the chamfer file on the workpiece.Also excellent for sharpening ski edges.Ordering notesThe Universal chamfer file includes a file blade.Workpiece materialsSteels up to 370 HV (< 38 HRC)AluminumGrey/nodular cast iron (GG/GJL, GGG/GJS)ApplicationsDeburringWorking on edgesCompatible power toolsManual application
Ergonomic file handle set with gauges 25/30-30/35 ° for chain saw file 3/16"-1/4"
The set includes an ergonomic file handle for chain saw files as well as two chain saw gauges: an angle of 25 °/30 ° and an angle of 30 °/35 °. The chain saw gauge supports consistent sharpening results by providing the correct sharpening angle. It is attached to the stud of the ergonomic file handle EDP 17046. This set comes in individual packaging for retails.
Ergonomic file handles
Technical informationPFERD Soft Grip File Handle for 4-6" Files with Narrow TangsItem number12617120EDP no.11143Length4.25 InchPFERD TOOLS typeFH 2Packaging unit10 EACHPFERD offers file handles in different versions and dimensions. From wooden handles for chain saw files to ergonomic file handles for machinist's files, sharpening files or rasps, to quick-mounting handles for needle files or precision files, PFERD has handles for a wide variety of files. Ergonomic file handle for comfortable and safe working.Special featuresProtects hands against sharp edges and corners.Ergonomic design optimizes haptic experience.Prevents files from rolling away.Softer, comfortable plastic on the exterior with a harder, stable interior.Created without plasticizer.Compatible power toolsManual application
File Set - Hand, Square, Half-Round, Round, Half-Round Wood Rasp 8" Coarse Cut
Quality files for industry and trade. These files are packaged in a protective and climate-resistant PVC pouch for storage in a toolbox or on a workbench. Each file comes with an ergonomic file handle. This plastic pouch comes in attractive packaging with a transparent window.
File Set - Hand, Three Square, Square, Tapered Half Round, Round, Coarse Cut
Quality files for industry and trade. These files are packaged in a protective and climate-resistant PVC pouch for storage in a toolbox or on a workbench. Each file comes with an ergonomic file handle. This plastic pouch comes in attractive packaging with a transparent window.
File Set - Hand, Three Square, Square, Tapered Half Round, Round, Second Cut
Quality files for industry and trade. These files are packaged in a protective and climate-resistant PVC pouch for storage in a toolbox or on a workbench. Each file comes with an ergonomic file handle. This plastic pouch comes in attractive packaging with a transparent window.
File set, different cuts
Technical informationPFERD DIY File Set - 3 Pieces 8"Item number11202300EDP no.16070Length8 InchPFERD TOOLS type300Packaging unit1 EACHQuality files designed for DIY users. Precise, with a high stock removal rate and good durability. Also suitable for sharpening. Each file comes with an ergonomic file handle. Packaged in a cardboard box.Special featuresDesigned for a wide range of applications.Consistently high stock removal rate from the tip to the tang.Durable.Workpiece materialsSteel, cast steelSteels up to 370 HV (< 38 HRC)ZincAluminumBrassBronzeCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)ApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
Flat File 8" Coarse Cut with Handle
PFERD's machinist files meet the highest quality standards. They are long lasting and have very good stock removal rates. Rectangular file, tapered and cut on four sides. Tanged version. Designed for work on rectangular geometries. Bastard cut for coarse stock removal and roughing. Files come in point-of-sale packaging with ergonomic file handles.
Flat PLUS File 8" with Handle
PFERD's machinist files meet the highest quality standards. They are long lasting and have very good stock removal rates. Rectangular file, cut on three sides, one side uncut. Tanged version. Designed for working on rectangular surfaces. Superior stock removal due to the PLUS cut. Files come in point-of-sale packaging with ergonomic file handles.
Half Round File 8" Coarse Cut with Handle
PFERD's machinist files meet the highest quality standards. They are long lasting and have very good stock removal rates. Half-round pointed file, cut on two sides. Tanged version. Designed for filing out concave surfaces and crevices, and for rounding out holes. Bastard cut for coarse stock removal and roughing. Files come in point-of-sale packaging with ergonomic file handles.
Holder for hand deburrer
Technical informationPFERD Hand Deburrer HandleItem number12605005EDP no.19500PFERD TOOLS typeH 4Packaging unit1 EACHPFERD offers holders for a range of files and file blades. The PFERD product range includes riffler file holders, adjustable holders for car body files and holders for file blades, tungsten carbide files and hand deburrers. Hand deburrer for efficient deburring, chamfering and reworking of different materials and contours. Hard-to-reach areas, bores, inner and outer diameters, and thread and grooves can easily be worked on by hand.Compatible power toolsManual application
Hoof rasps hand
Technical informationPFERD Hoof Plane File 14" Milled ToothItem number13180350CutmilledEDP no.15040Height1/4 InchIncl. handlewithoutLength14 InchPFERD TOOLS type3515Width1.75 InchPackaging unit1 EACHPFERD hoof rasps are good for hoof and horn care. Rectangular file, tanged and cut on four sides. One fine side and one coarse side. Designed for straightening the hoof surface, finishing the hoof wall, filing the toes, and working on the hoof nails after undercutting.Special featuresDurable.Very good surface quality.Effort-saving and reduces back strain.Comfortable filing for worker, and easy on the animal.Recommendations for useThe PFERD hoof plane can be used with commercially available file handles in the appropriate sizes.Workpiece materialsWoodApplicationsChamferingDeburringRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
HSS Twist Drill Set 1/16 - 3/8" M2 STEEL
This set contains 21 HSS spiral drills, excellent for industrial use on steel and other key materials. The drills are HSSG (M2) and come in a heavy-duty blue plastic case that protects against dirt and damage.
HSS Twist Drill Set 1/16 - 3/8" M35 (Co5) INOX
The set contains 21 HSS spiral drills, excellent for industrial use on stainless steel (INOX)and non-ferrous metals. The drills are HSSE-Co5 (M35) and come in a heavy-duty blue plastic case that protects against dirt and damage.
Key File Set - 6 Pieces Second Cut
Second cut for universal filing work. This set contains key files designed for a variety of different applications. Includes quick-mounting handle in a plastic pouch to protect against dirt and damage. Handle is only available in a set and not individually.
Key file set, cut 2
Technical informationPFERD Key File Set - 6 Pieces 4" Second CutItem number11702100Cut2Cut files typeSecondEDP no.17009Length4 InchPFERD TOOLS type265 APackaging unit1 EACHSecond cut for universal filing work. This set contains key files designed for a variety of different applications. Includes quick-mounting handle in a plastic pouch to protect against dirt and damage. Handle is only available in a set and not individually.Special featuresVersatile.Designed for filing delicate components.Workpiece materialsSteel, cast steelSteels up to 370 HV (< 38 HRC)ZincAluminumBrassCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)ApplicationsChamferingDeburringFinishingRoundingSharpeningSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
Machinist's file flat
Technical informationPFERD Flat File 12" Second CutItem number11103302Cut2Cut files typeSecondEDP no.11014Height9/32 InchIncl. handlewithoutLength12 InchPFERD TOOLS type1122Width1.15625 InchPackaging unit5 EACHPFERD's machinist files meet the highest quality standards. They are long lasting and have very good stock removal rates. Rectangular file, tapered and cut on four sides. Tanged version. Designed for work on rectangular geometries. Second cut for universal filing work. Files come in industrial packaging without handles.Special featuresConsistently high stock removal rate from the tip to the tang.Durable.Application-oriented design.Recommendations for useUse this file for universal workshop applications.Workpiece materialsSteel, cast steelSteels up to 370 HV (< 38 HRC)ZincAluminumBrassBronzeCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)ApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
Machinist's file half-round
Technical informationPFERD Pipeline File 14" Coarse CutItem number18100398Cut1Cut files typeBastardEDP no.11155Height11/32 InchIncl. handlewithoutLength14 InchPFERD TOOLS type1152Width1.375 InchPackaging unit5 EACHPFERD special files are designed for specific uses, such as for processing soft metals and thermosetting plastics, for deburring parts turned on a lathe, or for sharpening cutting tools. Files for working on pipeline weld seams and for removing scale on pipelines. Files come in industrial packaging without handles.Workpiece materialsSteel, cast steelSteels up to 370 HV (< 38 HRC)ZincAluminumBrassBronzeCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)ApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
Machinist's file half-round pointed
Technical informationPFERD Half Round File 10" Second Cut with Handle RetailItem number11235257Cut2Cut files typeSecondEDP no.11027PHeight9/32 InchIncl. handle12617141Length10 InchPFERD TOOLS type1152 SPWidth15/16 InchPackaging unit1 EACHPFERD's machinist files meet the highest quality standards. They are long lasting and have very good stock removal rates. Half-round pointed file, cut on two sides. Tanged version. Designed for filing out concave surfaces and crevices, and for rounding out holes. Second cut for universal filing work. Files come in point-of-sale packaging with ergonomic file handles.Special featuresConsistently high stock removal rate from the tip to the tang.Durable.Application-oriented design.Recommendations for useUse this file for universal workshop applications.Workpiece materialsSteel, cast steelSteels up to 370 HV (< 38 HRC)ZincAluminumBrassBronzeCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)ApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application
Machinist's file hand
Technical informationPFERD Flat PLUS File 12" with Handle RetailItem number11215306CutPLUS-cutCut files typePLUS-cutEDP no.11136PHeight9/32 InchIncl. handle12617151Length12 InchPFERD TOOLS type1112Width1.15625 InchPackaging unit1 EACHPFERD's machinist files meet the highest quality standards. They are long lasting and have very good stock removal rates. Rectangular file, cut on three sides, one side uncut. Tanged version. Designed for working on rectangular surfaces. Superior stock removal due to the PLUS cut. Files come in point-of-sale packaging with ergonomic file handles.Special featuresConsistently high stock removal rate from the tip to the tang.Durable.Application-oriented design.Easy and energy-saving due to spade-like filing teeth.No loading when processing soft materials due to a wide chip breaker.Good for all hobby and DIY purposes.Workpiece materialsSteel, cast steelSteels up to 370 HV (< 38 HRC)ZincAluminumBrassBronzeCast steelCopperGrey/nodular cast iron (GG/GJL, GGG/GJS)ApplicationsChamferingDeburringFinishingRoundingSurface workWorking on edges (chamfering, rounding)Compatible power toolsManual application