COMBIDISC® abrasive discs, 2" Dia, 60 Grit, 42773506
$0.00
Product number:
42773506
Product information "COMBIDISC® abrasive discs, 2" Dia, 60 Grit, 42773506"
Technical information
2" Dia, 60 Grit
| Dia. External | 2 in |
| Drive type | Angle grinder |
| Grit | 60 |
| Pack qty | 100 |
For universal coarse grinding with high stock removal and long service life. The CDR clamping system has a threaded connection with male thread (plastic). Also compatible with the following commonly used systems: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On.
Special features
- Particularly high stock removal rate in coarse grinding applications using grit size 60.
- Reduced down time due to quick changes.
- Convenient to use due to simple handling and low-vibration working.
- No operational disruptions caused by sticking, slipping, or disengaging.
Applications
- Deburring
- Step-by-step fine grinding
- Leveling
- Roughening
- Sharpening
- Surface work
- Work on weld seams
- Working on edges
Materials that can be worked
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Titanium
- Annealed cast iron
- Brass
- Bronze
- Cast steel
- Cobalt-based alloys
- Copper
- Grey/nodular cast iron (GG/GJL, GGG/GJS)
- Hardened, heat-treated steels over 370 HV (38 HRC)
Recommendations for use
- Use COMBIDISC® grinding discs with arbors or abrasive disc holders on flexible shaft drives with angle handpieces, compressed-air or electric angle grinders.
- Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
- Use with hard or medium-hard COMBIDISC® abrasive disc holders.
Safety
- The maximum permitted peripheral speed is 9,800 SFPM.
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
| Pack Qty: | 100 |
|---|
Login
No reviews found. Share your insights with others.