COMBIDISC® Unitized Disc, 2 x 1/4", F (fine) Grit, MH (medium-hard), 42759104
$0.00
Product information "COMBIDISC® Unitized Disc, 2 x 1/4", F (fine) Grit, MH (medium-hard), 42759104"
Technical information
2 x 1/4", F (fine) Grit, MH (medium-hard)
| Version | MH (medium-hard) |
| Dia. External | 2 in |
| Width | 1/4 in |
| Drive type | Angle grinder |
| Grit | F (fine) |
| Max. RPM | 19100 |
| Pack qty | 25 |
For achieving a very fine, uniform surface finish which, depending on requirements, is a sufficient preparation for high-gloss polishing. Ideal for small and medium-sized surfaces on stainless steel (INOX) components. The CD clamping system has a threaded connection with female thread (metal/plastic). Also compatible with the following commonly used systems: PSG, Power Lock Type II "turn on", SocAtt, Turn-On.
Special features
- Reduced down time due to quick changes.
- Convenient to use due to simple handling and low-vibration working.
- No operational disruptions caused by sticking, slipping, or disengaging.
Applications
- Cleaning
- Deburring
- Step-by-step fine grinding
- Roughening
- Structuring (matt finishing, brush matting and satin finishing)
- Surface work
- Work on weld seams
Materials that can be worked
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Thermoplastics
- Titanium
- Titanium alloys
- Aluminum
- Brass
- Bronze
- Cast steel
- Cobalt-based alloys
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Hardened, heat-treated steels over 370 HV (38 HRC)
- Nickel-based alloys (e.g. Inconell and Hastelloy)
Recommendations for use
- Use COMBIDISC® non-woven discs with abrasive disc holders on flexible shaft drives with angle handpieces, or small compressed-air or electric angle grinders.
- Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
Safety
- The maximum permitted peripheral speed is 9,800 SFPM.
| Pack Qty: | 25 |
|---|
Login