COMBIDISC® Mini Flap Disc, 3" Dia, 80 Grit, 42719708
$0.00
Product number:
42719708
Product information "COMBIDISC® Mini Flap Disc, 3" Dia, 80 Grit, 42719708"
Technical information
3" Dia, 80 Grit
| Dia. External | 3 in |
| Drive type | Angle grinder |
| Grit | 80 |
| Pack qty | 10 |
For universal coarse grinding with high stock removal and long service life. The CD clamping system has a threaded connection with female thread (metal/plastic). Also compatible with the following commonly used systems: PSG, Power Lock Type II "turn on", SocAtt, Turn-On.
Special features
- Reduced down time due to quick changes.
- Convenient to use due to simple handling and low-vibration working.
- No operational disruptions caused by sticking, slipping, or disengaging.
Applications
- Deburring
- Step-by-step fine grinding
- Leveling
- Roughening
- Sharpening
- Surface work
- Work on weld seams
- Working on edges
Materials that can be worked
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 370 HV (< 38 HRC)
- Titanium
- Annealed cast iron
- Brass
- Bronze
- Cast steel
- Cobalt-based alloys
- Copper
- Grey/nodular cast iron (GG/GJL, GGG/GJS)
- Hardened, heat-treated steels over 370 HV (38 HRC)
Recommendations for use
- Use COMBIDISC® Mini-POLIFAN discs with arbors on flexible shaft drives with angle handpieces, or small compressed-air or electric angle grinders.
- Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
- Use in the case of a higher contact pressure.
Safety
- The maximum permitted peripheral speed is 9,800 SFPM.
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
| Pack Qty: | 10 |
|---|
Login
No reviews found. Share your insights with others.