COMBICLICK® Surface Finishing Set, 5" Dia

Technical information

5" Dia

The COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high air throughput, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive. Set for work on surfaces, from coarse to mirror-polished. Consisting of COMBICLICK® fiber discs, non-woven discs, felt discs, backing pads, and polishing paste. The set with a 5" diameter is especially flexible around the edge. The universal polishing paste is only available in a set and not individually.

Special features

• Curated selection of the most common versions.
• Getting to know and testing the comprehensive system.
• Innovative quick-mounting system guarantees convenient handling and cool grinding
• Extremely quick and easy disc changes reduce process costs.
• With COMBICLICK®, scratches caused by protruding clamping parts are prevented and very high utilization of the available abrasive is attained.

Applications

• Cleaning
• Deburring
• Step-by-step fine grinding
• Leveling
• Polishing
• Roughening
• Structuring (matt finishing, brush matting and satin finishing)
• Surface work
• Work on weld seams
• Working on edges

Materials that can be worked

• Stainless steel (INOX)
• Steel materials with a hardness > 54 HRC
• Steels up to 370 HV (< 38 HRC)
• Aluminum
• Brass
• Bronze
• Cast steel
• Copper
• Hardened, heat-treated steels over 370 HV (38 HRC)

Recommendations for use

• Use COMBICLICK® felt discs with COMBICLICK® backing pads on variable speed angle grinders.
• For the best performance, use with a recommended peripheral speed of 1,000-2,000 SFPM. This provides an ideal compromise between polishing performance, thermal load on the workpiece and tool wear.
• When applying a different polishing paste, use a new unused felt disc.

Safety

• For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.